Diyvehiclerepair
GMC Yukon Change Engine Oil Light Reset Procedures:
- Turn ignition switch to ON position with engine off.
- Fully depress and release the accelerator pedal 3 times within 5 seconds of turning key.
- Change Oil lamp will flash for 2-10 seconds while it resets.
- Once it stops flashing, the maintenance light reset is complete.
- How do I clear my oil change reminder?
- How do you reset the change oil light on a 2004 Chevy Tahoe?
- Why does my car say oil change required after oil change?
- Why won't my change oil light go off?
- Why is my change oil light on when I just changed my oil?
- How do you reset the change oil light on a 2002 Chevy Silverado?
How do I clear my oil change reminder?
Hold the Reset Button and Turn the Key
Watch the oil change or maintenance light carefully. It should start to blink. Allow the light to blink ON and OFF for a few seconds, then release the reset button and turn the ignition OFF.
How do you reset the change oil light on a 2004 Chevy Tahoe?
Turn the ignition switch to the On position without starting the engine. Gently press the accelerator pedal all the way down to the floor three times within five seconds. The Oil Life should reset to 100%, and the “Change Engine Oil Soon” notification should be cleared.
Why does my car say oil change required after oil change?
The change oil soon notification has come on, simply because whoever did the oil service neglected to reset the service indicator. A quick check on line will give you the information you need to perform a reset. The service indicator has no intelligence, it just crunches numbers. As I said someone forgot to do a reset.
Why won't my change oil light go off?
If your oil light stays on even after changing your engine oil, you're going to want to check the sensor first to rule out a malfunctioning sensor as the cause. ... The oil pump may not be circulating enough oil to keep the engine's parts lubricated and functioning properly, which can in turn cause multiple engine issues.
Why is my change oil light on when I just changed my oil?
The light could be on after an oil change because of an issue with the oil pump. If this is the cause, there could be not enough oil circulating through to the various parts. Performing regular oil changes should help prevent this from happening, but parts do wear out.
How do you reset the change oil light on a 2002 Chevy Silverado?
For the 2002 silverado you just need to turn the ignition to the on position but do not start your vehicle. Press the gas pedal to the floor 3 times within 5 seconds and you should see the change oil message flash if done correctly.
